논문명 |
건식벽체에 폴리싱타일을 적용하기 위한 유기·무기질 혼합계 타일접착제 종류에 따른 부착안정성 평가에 관한 연구 / A Study on the Estimation of Adhesive Stability According to Organic·Inorganic Mixed Tile Bond Type for Application of Polishing Tile to Dry Wall System |
저자명 |
오상근 ; 이기장 ; 유재강 ; 김수련 ; 이성일 |
발행사 |
한국건축시공학회 |
수록사항 |
한국건축시공학회 논문집, v.2 n.3(통권 제5호) (2002-08) |
페이지 |
시작페이지(163) 총페이지(8) |
주제분류 |
시공(적산) |
주제어 |
폴리싱 타일 ; 건식벽체 ; 부착강도 ; 석고보드 ; 무석면보드 ; Polishing tile ; The dry wall ; Adhesive strength ; Gypsum board ; Non asbestos board |
요약1 |
본 연구에서는 건식벽체에 폴리싱타일을 시공함에 있어 에폭시 본드를 포함한 유기·무기 혼합형 타일접착제 종류에 따른 폴리싱타일의 부착성능을 실험실 및 현장 Mock-up시험체에 대하여 비교·평가하고, 사용상 작용하는 진동 및 열의 영향을 고려한 촉진환경이 타일의 부착성능에 미치는 영향을 검토함으로서, 폴리싱타일의 부착안정성 확보를 위한 자료를 구축하고, 향후 시공 및 유지관리 측면에서 이의 적용에 대한 바람직한 방향을 제시하고자 한다. |
요약2 |
Recently, polishing tile(porcelain homogeneous polished tile) was used in the construction field as a finishing material. But, there happened some problems such as tile exfoliation by construction condition in early ages. Also, for use of polishing tile in the dry wall system which used to lightweight wall, the examination of adhesive stability of polishing tile is needed. In this study, adhesive strength of polishing tile was investigated by tile bond types on gypsum board and non asbestos board coated by tar-urethane and polymer modified cementitious waterproofing membrane(SeriesⅠ). Then, the effect of heat stress and vibration was estimated on gypsum and non asbestos board(SeriesⅡ). As the result of study are the follows; (1) Polishing tile(600×400mm) construction on waterproofing layer : Both laboratory estimation and spot examination sieve were happened that fall of tile because their hardening speed is late. (2) To using powder style adhesives in the dry wall with waterproofing layer : Adhesive strength of tile is influenced by interface bond area and base side condition. (3) Shock and heat stresses : obvious decline of adhesive stength is not happened |
소장처 |
한국건축시공학회 |