뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 강-콘크리트 불완전 합성보의 처짐평가 / Deflection of Steel-Concrete Composite Beams with Partial Shear Interaction
저자명 허병욱(Heo Byung-Wook) ; 곽명근(Kwak Myung-Geun) ; 배규웅(Bae Kyu-Woong)
발행사 대한건축학회
수록사항 대한건축학회논문집 구조계, v.23 n.9 (2007-09)
페이지 시작페이지(31) 총페이지(8)
ISSN 12269107
주제분류 구조
주제어 전단연결재 ; 합성보 ; 유효강성 ; 전단슬립 ; 불완전 합성//Shear Connector ; Composite Beams ; Effective Stiffness ; Shear Slip ; Partial Shear Interaction
요약1 본 논문에서는 강-콘크리트 합성보의 처짐에 대해서 전단슬립의 효과를 파악하였다. 현재 각국의 설계규준은 전단연결재의 강도비로 합성보의 강성을 평가하고 있기 때문에 완전 합성보의 경우에는 슬립의 영향에 의한 합성보의 강성저하를 고려할 수 없고, 또한, 스터드를 사용하지 않은 불완전 합성보의 경우에도 적절한 설계식이 제시되고 있지 못한 실정이다. 앞선 연구에서는 전단연결재의 강성 값을 사용하고 하중조건 및 전단슬립 효과를 고려할 수 있는 불완전 합성보의 유효강성 평가방법을 유도한 바 있다. 따라서 본 연구에서는 불완전 합성보의 처짐에 미치는 전단슬립의 영향을 평가하기 위해서 현재 일반적으로 사용되고 있는 노출형 합성보의 휨성능 실험을 수행하였으며, 실험결과를 바탕으로 기존에 제시되어 있는 제안식 및 규준식을 사용하여 합성보의 전단연결비에 따른 유효강성 평가방법의 타당성을 검증하고자 한다.
요약2 The present study investigates the effects of shear slip on deflection of steel-concrete composite beams with partial shear interaction. According to the various current design codes, the deflection is related to the strength of shear connectors in the composite beams. However, the decrease of stiffness due to slip effects are not considered in the current design codes and relevant calculation tools for partial shear connection are not even presented. In previous study, It is derived an exact solution based on the stiffness of shear connectors which is not dependent on the load cases. The equivalent rigidity of composite beams considering three different loading types was first derived based on equilibrium and curvature compatibility, from which a general formula to account for slip effects was developed. To validate this approach, the predicted maximum deflection using the proposed method and currently used equations for the calculation of the beam effective stiffness is compared against test results. From the comparison between test results and analytical study, it is found that the stiffness of a composite beam based on the strength of shear studs is considerably over-estimated. The stiffness of composite beams is predicted accurately with the method proposed in this study.
소장처 대한건축학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
내진성능평가요령에 따른 4층 RC조 건물의 내진평가
유은종 ; 김용준 ; 김태진 ; 김승진 ; 안충원 - 한국지진공학회 추계워크샵 발표논문집 : (201109)
매입형 합성보의 전단합성거동에 대한 비교분석
신현섭 ; 허병욱 ; 배규웅 ; 김긍환 - 한국강구조학회 논문집 : v.20 n.1 (200802)
[핵심구조상식] 신축줄눈(EXPANSION JOINT)설치기준
유영기 - 삼성건설 기술정보 : 2003 상반기(통권 제49호) (200301)
비구조요소의 내진설계기준 비교
장극관(Chang, Kug-Kwan) ; 임영철(Lim, Young-Chul) ; 서대원(Seo, Dae-Won) - 대한건축학회논문집 구조계 : v.29 n.1 (201301)
강판성형 합성보의 휨성능 평가
허병욱 ; 곽명근 ; 배규웅 ; 정상민 - 한국강구조학회 논문집 : v.19 n.3 (200706)
[특집] 공업화박판강구조(PEB구조)와 최근 경주 지붕붕괴 참사
이철호 - 건축(대한건축학회지) : v.58 n.10 (201410)
[기술자료] 고력볼트의 마찰접합에 대한 소고
강석규 - 건설기술정보 : VOL.30 2001 (200107)
[특집] KBC 2016의 지진하중
박홍근(Park, Hong-Gun) ; 이기학(Lee, Kihak) ; 김동관(Kim, Dong-Kwan) - 건축(대한건축학회지) : Vol.60 No.09 (201609)
[특집] 우리나라 내진설계 현황 및 문제점
한상환 - 건축(대한건축학회지) : v.55 n.5 (201105)
매립형 불완전 합성보의 휨 거동 예측
허병욱 ; 배규웅 ; 문태섭 - 한국강구조학회 논문집 : v.16 n.6 (200412)