논문명 |
트러스 데크를 사용한 강판성형 합성보의 휨성능 평가 / Flexural Capacity of the Profiled Steel Composite Beams with Truss Deck Plate |
저자명 |
허병욱 ; 곽명근 ; 배규웅 ; 정상민 ; 강석규 |
발행사 |
한국강구조학회 |
수록사항 |
한국강구조학회 논문집, v.19 n.4 (2007-08) |
페이지 |
시작페이지(413) 총페이지(11) |
ISSN |
1226363X |
주제분류 |
구조 |
주제어 |
합성보 ; 강판성형보 ; 매입형 합성보 ; 전단연결재 ; 전단부착응력//Composite Beams ; Profiled Steel-beams ; Encased Composite Beams ; Shear Connection ; Shear Bond Sterss |
요약1 |
기존의 층고절감형 합성보 시스템은 철골보의 웨브면에 바닥판을 삽입하여 시공하기 때문에 상대적으로 기존 합성보 형식과 비교하여 층고를 대폭적으로 줄일 수 있지만, 적용되는 철골보 춤이 제한되기 때문에 적용 가능한 스팬이 한정되어 있어 여러 가지 다양한 건축구조의 수요에 능동적으로 대처하기가 어려운 단점이 있다. 따라서, 본 연구에서는 기존의 층고절감형 합성보의 단점을 해결하기 위하여 합성보의 춤을 자유로이 조절할 수 있는 층고절감형 매입형 합성보를 개발하였다. 본 연구는 콘크리트에 매입된 강팡성형 철골보를 가지는 불완전 합성보의 휨거동에 관한 것이다. 총 5개의 실대형 실험체를 전단연결재 및 보강근의 사용유무, 슬래브 형식을 주요변수로 하여 실험을 수행하였다. 실험결과, 별도의 전단연결재를 설치하지 않은 실험체는 자체가 가지고 있는 기계적?화학적 부착응력으로 인해 0.20~0.76N/㎟의 부착응력을 나타내었다. |
요약2 |
Slimfloor composite-beam systems could considerably reduce the story height of a building if the steel beam would be installed deep into the concrete floor slab. However, as the depth of the steel beam’s installation is limited, it cannot cope with the various demands of building systems. To address this problem, a profiled steel beam section that can control the depth of the steel beam’s and slabs’ installation was developed in this study. Presented herein are the results of an experiment that was conducted focusing on the flexural behavior of the partially connected composite beams with profiled steel beams encased in composite concrete slabs. Five full-scale specimens with different slab types, with or without shear connection and reinforcement bars, were constructed and tested in this study. As a result, the shear bond stress without an additional shear connection was found to be 0.20~0.76 N/㎟due to the inherent mechanical and chemical bond stress. |
소장처 |
한국강구조학회 |