논문명 |
친환경 층고 절감형 합성보의 보-기둥 접합부 상세 및 시공성 연구 / Environmental Friendly Connection of Composite Beams and Columns |
저자명 |
홍원기 ; 김진민 ; 박선치 ; 임선재 |
발행사 |
한국생태환경건축학회 |
수록사항 |
한국생태환경건축학회 논문집, v.7 n.6(통권 28호) (2007-12) |
페이지 |
시작페이지(113) 총페이지(6) |
ISSN |
15983730 |
주제분류 |
시공(적산) |
주제어 |
합성보 ; 보-기둥 접합부 ; 강접합 ; 핀접합 ; Composite beam ; Beam-Column Connection ; Rigid Joint ; Pin Joint |
요약1 |
본 연구는 합성보와 다양한 기둥 시스템과의 접합에 대한 연구이며, 그 접합부의 상세에 대한 제안을 하고자 한다. |
요약2 |
The composite beam adopted in the study was designed to reduce the floor height as well as to embed the top flange of steel frame into the slab that will enable to avoid applying the fire-resistant coating and to unify the joint method with a steel frame-type. As the steel frame and bottom concrete of the beam is pre-fabricated at the factory it could reduce the overall schedule at the jobsite. Applying such composite beam system to the work is expected to provide the efficient and enhanced performance, given the current tendency of the building construction that tends to be getting higher, larger and dense. The study focused on combining the composite beam with various column systems in a bid to propose the details thereof. A desirable composite girder can be adopted depending on site conditions through the evaluation of various beam and jointing approaches. Among the column systems applied to the study are steel column, SRC column, RC-PC column and RC column. The ways of combining with the columns addressed in the study were categorized into the rigid joint, pin joint, steel frame joint and bracket type joint. Besides, the instruction for site fabrication of beam-column was added in an effort to help set up the site fabrication procedures. |
소장처 |
한국생태환경건축학회 |