뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 피복두께에 따른 초고강도 콘크리트에 매립된 철근의 부착특성 / Bond Characteristics of the Reinforcement Embedded in Ultra High-Strength Concrete according to the Concrete Cover
저자명 정재형(Jung Jae-Hyung) ; 강훈(Kang Hoon) ; 안종문(Ahn Jong-Mun) ; 신성우(Shin Sung-Woo)
발행사 대한건축학회
수록사항 대한건축학회논문집 구조계, v.24 n.10 (2008-10)
페이지 시작페이지(45) 총페이지(8)
ISSN 12269107
주제분류 재료
주제어 부착응력 ; 초고강도 콘크리트 ; 콘크리트 피복두께 ; 부착길이 ; 쪼개짐 파괴 ; 뽑힘 파괴//Bond Stress ; Ultra High-strength Concrete ; Concrete Cover ; Bond Length ; Splitting Failure ; Pull-out Failure
요약2 An experimental study was conducted to evaluate the bond characteristics of reinforcing bars embedded in ultra high-strength concrete. The Major variables are bar diameter(19mm, 22mm, 25mm) and concrete cover(30mm, 40mm, 50mm). The concrete compressive strength was kept equal strength(150Mpa) at each specimen and confining of bar space effect were not taken into account. Nine specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embedded in concrete. The test results obtained show that the bond strength increases in proportion to compressive strength. It shows that the produced steps of the critical slips on each variable are not constant. And as the bar diameter was smaller and smaller, maximum bond strength was bigger and bigger. Therefore the concrete cover has affected to the bond strength. The Bond strength of specimens with 40mm concrete cover has a higher strength than 30mm. Furthermore, when the ratio of concrete cover(C/db) is below the 2.0, splitting failure should not be disregarded. After comparing with ACI, Zsutty and test results, Zsutty's theory is more appropriate to the experiment result by 1.29 times of the result.
소장처 대한건축학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
150MPa 초고강도 콘크리트와 철근의 부착응력 평가
정재형(Jung Jae-Hyung) ; 강훈(Kang Hoon) ; 안종문(Ahn Jong-Mun) ; 신성우(Shin Sung-Woo) - 대한건축학회논문집 구조계 : v.24 n.12 (200812)
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
철근의 부식률이 콘크리트의 부착강도에 미치는 영향
김현욱(Kim Hyun-Uk) ; 지남용(Jee Nam-Yong) - 대한건축학회논문집 구조계 : v.21 n.11 (200511)
[연구논문-건축·주택] 공동주택 지하주차장 결로 방지 방안
홍석진 ; 성기철 ; 김지현 - 대우건설기술 : 통권 제32호 (201008)
국내 패시브건축물 설계 및 시공사례
이명주 - 한국그린빌딩협의회 추계학술강연회 논문집 : (200911)
순환골재콘크리트와 이형철근 사이의 부착성능
최희복(Choi Hee-Bok) ; 강경인(Kang Kyung-In) - 대한건축학회논문집 구조계 : v.24 n.3 (200803)
초고강도 콘크리트를 활용한 고온가열 이후의 탄소 보강근과 철근의 잔류 부착성능 평가
유선재(Sun-Jae Yoo) ; 이호진(Ho-Jin Lee) ; 원천봉(Tian-Feng Yuan) ; 윤영수(Young-Soo Yoon) - 한국구조물진단유지관리공학회 논문집 : Vol.25 No.6 (202112)
콘크리트 압축강도가 GFRP 복합재료 보강근의 부착강도에 미치는 영향
김태영(Kim Tae-Young) ; 박지선(Park Ji-Sun) ; 이정윤(Lee Jung-Yoon) ; 김긍환(Kim Keung-Hwanaik) - 대한건축학회논문집 구조계 : v.21 n.12 (200512)
[특집] 방수공사의 종류와 시공기술의 이해
안상로 ; 곽규성 ; 최성민 ; 오상근 - 한국건축시공학회지 : v.10 n.4(통권 제42호) (201008)
[기술정보] 흙막이가시설의 종류 및 최신공법 소개
윤성필 - 건설기술ㅣ쌍용 : 2010. 가을호(v.56) (201009)