뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 고로슬래그와 레드머드를 사용한 무시멘트계 복합체의 유동 및 강도특성에 관한 연구 / A Study on the Strength and Flowing Properties of the Non-cement Inorganic Composite by Using Blast Furnace Slag and Red Mud / 시공재료
저자명 이윤성 ; 이강필 ; 이상수 ; 송하영
발행사 한국건축시공학회
수록사항 한국건축시공학회 학술.기술논문발표회 논문집, v.10 n.2(통권 제19호) (2010-11)
페이지 시작페이지(91) 총페이지(4)
주제분류 재료
주제어 알칼리 자극제 ; 고로슬래그 ; 레드머드 ; 복합체 ; Alkali accelerator ; Blast furnace slag powder ; Red mud ; Inorganic composite
요약2 Recently, as the national policy of green growth is promoted, construction field also makes an effort to reduce CO2 gas released when producing cement continuously. In other words, as the method solving environmental pollution and resources exhaustion, lots of mineral material compounds such as blast furnace slag powder which is industrial by-product, fly ash, red mud, etc. are examined to be used as the substitute good of cement. Therefore, this study intended to supplement the weaknesses of blast furnace slag powder and red mud with blast furnace slag powder and red mud, as the substitute good of cement, not concrete compound, manufacture inorganic composite of cement world, which can be made with only alkali accelerator at normal temperature, without high-temperature plasticity. After confirming kinds of red mud and alkali liquids and physical property by the change of addition rate with fundamental experiment, proper mix was drawn by combining blast furnace slag powder.
소장처 한국건축시공학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
고로슬래그에서의 무수석고의 작용기구
이희건 ; 이승헌 ; 김상규 ; 전준영 ; 황해정 - 한국건설순환자원학회 학술발표 논문집 : v.10 n.2 (201011)
나노슬래그와 알칼리 자극제를 활용한 비소성 시멘트 모르타르에 관한 연구
정성욱 ; 임남기 - 한국건축시공학회 논문집 : v.10 n.6 (201012)
고로슬래그와 나트륨계열 활성화제를 이용한 무시멘트 모르타르의 특성
송진규(Song Jin-Gyu) ; 양근혁(Yang Keun-Hyeok) ; 김건우(Kim Geon-Woo) ; 김병조(Kim Byeng-Jo) - 대한건축학회논문집 구조계 : v.26 n.06 (201006)
메타카올린과 알칼리 자극제를 사용한 무시멘트계 무기복합체의 유동특성 및 강도특성 연구
이강필 ; 김성수 ; 이윤성 ; 이상수 ; 송하영 - 한국건축시공학회 학술.기술논문발표회 논문집 : v.10 n.1(통권 제18호) - 학계 (201005)
국내 프리캐스트 콘크리트 건축 시장현황 조사 연구
홍성엽(Hong, Sung Yub) ; 오세윤(Oh, Se Yoon) - 한국콘크리트학회 학술대회 논문집 : Vol.30 No.2 (201811)
3D 프린팅 공법 적용을 위한 모르타르 구성성분 변화에 따른 레올로지 특성 연구
이호재(Hojae Lee) ; 김원우(Won-Woo Kim) ; 문재흠(Jae-Heum Moon) - 한국건설순환자원학회 논문집 : Vol.6 No.1 (201803)
레드머드 혼입한 2성분계 지오폴리머 콘크리트의 강도특성에 관한 연구
이선관(Lee, Sun-Kwan) ; 김영수(KimYoung-Su) - 대한건축학회논문집 구조계 : v.30 n.1 (201401)
산업부산물을 사용한 알칼리 활성 무시멘트 모르타르의 품질특성에 관한 연구
권용훈 ; 권영호 ; 이동규 - 한국건설순환자원학회 논문집 : v.1 n.1 (201306)
미분쇄한 플라이애시 모르타르의 강도증진 방안에 관한 연구
조현대 ; 정재동 - 한국건축시공학회 논문집 : v.10 n.1(통권 제39호) (201002)
일라이트와 이산화티탄을 활용한 콘크리트 블록의 수질환경개선을 위한 실험연구
허재원(Jae-Won Her) ; 강경수(Kyung-Soo Kang) ; 김영수(Young-Su Kim) - 한국구조물진단유지관리공학회 논문집 : Vol.22 No.1 (201801)