논문명 |
초고층 건축물 커튼월의 경제적인 설계를 위한 실물시료시험 결과와 구조설계 결과의 비교에 관한 연구 / Comparative Study of Mock-up Test Result with Structural Design Results for Cost-effective Design of Skyscraper Curtain Wall Systems / 제2분과 : 시공, 재료 |
저자명 |
강민재 ; 옥종호 |
발행사 |
한국건설관리학회 |
수록사항 |
전국 대학생 학술발표대회 논문집 (2011-11) |
페이지 |
시작페이지(199) 총페이지(4) |
주제분류 |
시공(적산) |
주제어 |
커튼월 구조설계 ; Mock-up Test ; 멀리언 ; 트랜섬 ; 풍하중 ; Curtain Wall Structural calculation ; Mock-up Test ; Mullion ; Transom ; Wind Load |
요약1 |
최근 국·내외 건설시장에서의 초고층 건축물 증가에 따라 외장재 중 커튼월의 사용이 일반화되고 있고, 그 공사 금액 또한 증가하는 추세이다. 커튼월 공사에 있어 공사금액의 상당부분을 차지하는 알루미늄 및 스틸의 물량은 구조설계 결과에 따라 결정되어 지고 있다. 또한 구조설계 결과와 Mock-up Test 결과를 비교했을 경우 Mock-up Test 결과가 일반적으로 더 적게 나오고 있기 때문에, 구조설계 결과와 Mock-up Test 결과의 차이를 줄이는 방안의 연구는 커튼월 공사의 물량을 감소시킬 수 있을 것으로 예상된다. 현재 국내 외장업체에서의 구조 설계 방법은 단순화한 한 개의 수직부재에 등분포 하중을 적용하여 결과를 산출하는 것이 일반적이다. 결과적으로 실제 분담하는 하중보다 이를 단순화한 등분포 하중이 더 큰 하중으로 작용하기 때문에 구조검토 시 알루미늄 커튼월 단면 설계에 있어서 과설계를 유발하는 요인으로 작용하고 있다. 따라서 본 논문에서는 실제 멀리언이 분담하는 하중과 이를 단순화한 등분포하중을 적용한 구조해석 모델링을 통해 처짐량을 산출하고, Mock-up Test의 실제 처짐량과 비교하여, 멀리언 부재의 경제적인 하중적용방법에 대한 기준을 마련하고자 한다. |
요약2 |
Recently, the bureau According to the high-rise building increase in the around construction market, the use of curtainwall is generalized among the exterior material. This amount of money of construction is the tendency that it increases. As to the curtain wall construction, the supply of the occupies the substantial portion of the amount of money of construction aluminum and steel is decided been according to the results of architectural design. In addition, generally the Mock-up Test result comes out a little bit in case of comparing the results of architectural design and Mock-up Test result. Therefore the research of the method reducing the difference of the results of the architectural design and Mock-up Test result can reduce the supply of the curtain wall construction. Presently, it is general that the designing method in the interior of a country sheath enterprise produces the result by applying the uniform load to simplified one vertical member. Consequently, because the uniform load simplifying this more than the load shared actually acts on the large-scale load, it acts as the factor inducing the department design in the structure investigation as to the aluminum curtainwall design of sections. Therefore, in this paper, the droop amount is produced through the structural analysis modeling applying the load and which the mullion shares actually uniform load simplifying this. The standard about the economic load application method of the mullion member tries to be prepared compared with the actual droop amount of the Mock-up Test. |
소장처 |
한국건설관리학회 |