논문명 |
산업연관분석법을 이용한 강도에 따른 구조용 강재의 이산화탄소 배출량 데이터 구축 / An analysis on CO2 emission of structural steel materials by strength using Input-Output LCA |
저자명 |
홍태훈(Hong, Tae-Hoon) ; 지창윤(Ji, Chang-Yoon) ; 장민호(Jang, Min-Ho) |
발행사 |
한국건설관리학회 |
수록사항 |
한국건설관리학회 논문집, Vol.13 No.4 (2012-07) |
페이지 |
시작페이지(132) 총페이지(9) |
ISSN |
1229-7534 |
주제분류 |
시공(적산) |
주제어 |
이산화탄소 배출량 ; 산업연관분석법 ; 전과정평가 ; 건축구조용 강재//CO2 emission ; Input-Output LCA ; Life Cycle Assessment ; Steel Product |
요약1 |
지구온난화와 같은 환경문제에 대한 인식의 확산과 함께 대한민국 정부는 탄소배출량을 2020년까지 BAU 대비 30% 감축하는 것을 목표로 다양한 정책 및 제도를 마련하고 있다. 이에 따라, 건설산업 분야에서는 건축물로부터 배출되는 이산화탄소를 적절하게 관리하고 감축하기 위한 방법에 대한 연구가 활발하게 진행되어 왔다. 건축물에 대한 정확한 이산화탄소 배출량 평가를 위해서는 건축자재에 대한 상세한 수준의 이산화탄소 배출량 데이터가 필요하지만, 현재까지는 대표적인 자재의 데이터만 제시되어 왔다. 이에 따라 본 연구에서는 건축물의 시공에 필수적으로 사용되는 구조용 강재인 철근과 H형강의 이산화탄소 배출량 데이터를 강도 및 규격에 따라 상세한 수준으로 제시하고자 하였다. 이를 위해 산업연관표를 바탕으로 하는 산업연관분석법을 적용하였다. 본 연구에서 제시하는 강도 및 규격에 따른 구조용 강재의 이산화탄소 배출량 데이터를 활용하면, 다양한 구조설계안에 대하여 보다 정확한 이산화탄소 배출량 평가가 가능할 것으로 판단된다. |
요약2 |
Along with the increasing interest in environmental problems such as global warming, the South Korean government has established policies and regulations to reduce the amount of greenhouse gases, targeting a 30% reduction of CO2 compared to business-as-usual levels by 2020. Thus, there have been many studies in construction field to control and reduce the amount of CO2 emitted from buildings. CO2 emission from the building construction could be obtained by using the life cycle assessment(LCA) methodology. In LCA, it is essential to have life cycle inventory(LCI) data of construction materials consisting of CO2 emission data that have been defined and examined in a detailed way in order to obtain more accurate and detailed CO2 emission of buildings. To date, however, the LCI data have been acquired only for the representative materials. Accordingly this study aimed to propose detailed CO2 emission data for steel rebar and H-beam, which are the essential structural steel materials, by strength and type. To accomplish the objective, this study used Input-Output LCA methodology which is based on the Input-Output table. It is believed that the CO2 emission data of steel materials acquired from this study would allow a more accurate assessment of CO2 emission for diverse structural design alternatives. |
소장처 |
한국건설관리학회 |