뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 유닛모듈러 건축물의 설계 초기 단계에서의 고려 사항 / Considerations in the early stage of Designing the Unit Modular Building
저자명 이영호(Lee, Young-Ho) ; 이두헌(Lee, Du-Heon) ; 김균태(Kim, Kyoon-Tai)
발행사 한국건설관리학회
수록사항 한국건설관리학회 논문집, Vol.13 No.6 (2012-11)
페이지 시작페이지(133) 총페이지(10)
ISSN 1229-7534
주제분류 시공(적산)
주제어 유닛모듈러 건축물 ; 설계품질 ; 시공품질 ; 설계 초기 단계에서의 고려사항//Unit modular building ; design quality ; construction quality ; considerations in the early stage of Design
요약1 최근 저탄소 녹색성장 등 건설 환경의 변화에 따라 친환경적이고 시공 효율성을 극대화할 수 있는 유닛모듈러 공법 등과 같은 새로운 건축시스템에 대한 요구가 증대되고 있다. 유닛모듈러 공법은 전체 공정의 80%이상을 공장에서 제작하고 현장에서는 유닛모듈 조립과 마감작업 위주로 작업이 진행되므로 설계 및 공장 제작 등 현장시공 이전 단계의 품질이 건축물 전체의 품질을 좌우하는 특성을 가진다. 국내 유닛모듈러 공법은 2003년 학교 건축물의 적용을 시작으로 점차 확대되고 있지만, 적용 사례와 관련 자료의 부족, 모듈러 생산업체의 영세성 등으로 유닛모듈러 공법의 특성을 충분히 반영한 설계, 공장제작 및 현장시공은 아직 이루어지지 못하고 있는 실정이다. 본 연구는 국내 유닛모듈러 건축물의 설계품질 향상의 일환으로 공장제작 및 현장시공 단계에서의 문제점을 도출하고, 그 원인을 비교?분석함으로써 유닛모듈러 건축물의 설계 초기 단계에서 고려해야 할 주요 검토 항목을 제시하였다.
요약2 With the recent changes in building environments such as low-carbon green growth, there have been increasing demands for the new building system that is eco-friendly and can maximize efficiency such as the unit modular system. For the unit modular system, more than 80% of the whole process is carried out in the factory while in the field, mostly unit module assembling and finish work are done. Thus, the quality at the pre-construction stage when design and manufacturing are done determines the quality of the building as a whole. In the country, the unit modular method was first applied in 2003 to school buildings and has gradually expanded afterwards, but due to the lack of examples and related information as well as the small scale of modular manufacturers, its characteristics have not been sufficiently reflected in design, manufacturing and field constructions. This study, as an attempt to improve the design quality of unit modular buildings, points to the problem in manufacturing and field construction, compares and analyzes its causes, and suggests major points to be considered in the early stage of designing the unit modular buildings.
소장처 한국건설관리학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
유닛 모듈러 공법의 효율성 확보를 위한 공장제작, 운반, 현장설치의 최적 공정 제안
이광복(Lee, Kwang-Bok) ; 김경래(Kim, Kyung-Rai) ; 신동우(Shin, Dong-Woo) ; 차희성(Cha, Hee-Sung) - 한국건설관리학회 논문집 : Vol.12 No.6 (201111)
주거시설로서 모듈러건축 활용화 방안
김지현 ; 박일민 - 한국주거학회논문집 : v.24 n.3 (201306)
[특집] 모듈러 건축시스템의 설계
임상진 - 그린빌딩(한국그린빌딩협의회지) : v.12 n.3 (201109)
[학교시설] 모듈러 건축물의 해외 사례 소개
유영동 ; 김상호 - 교육시설(한국교육시설학회지) : v.11 n.2 (200403)
[특집] 국내외 주거용 모듈러 건축의 사례분석
김정학 ; 조봉호 - 건축(대한건축학회지) : v.58 n.05 (201405)
[특집] 친환경건축시스템으로서 영국의 모듈러 건축물 사례
임재한 - 그린빌딩(한국그린빌딩협의회지) : v.12 n.3 (201109)
[논문] 해체·조립식 모듈러 철골조 건물의 시공성에 관한 연구
정성림 ; 강주원 ; 박성무 - 한국공간구조학회지 : v.8 n.4(통권 32호) (200808)
모듈러 건축 시스템의 기술개발 동향 및 적용 사례
조봉호 ; 고광호 ; 김홍진 - 한국강구조학회지 : v.19 n.1 (200703)
[특집] 국내 친환경 건축물 사례 분석
정지나 ; 김용석 ; 이승민 - 그린빌딩(한국그린빌딩협의회지) : v.9 n.1 (200803)