논문명 |
산업부산물을 사용한 지오폴리머 콘크리트의 역학적 특성에 관한 연구 / Study on Mechanical Properties of Geopolymer Concrete using Industrial By-Products |
저자명 |
김시환 ; 고경택 ; 이장화 ; 류금성 |
발행사 |
한국건설순환자원학회 |
수록사항 |
한국건설순환자원학회 논문집, v.2 n.1 (2014-03) |
페이지 |
시작페이지(52) 총페이지(8) |
ISSN |
2288-3320 |
주제분류 |
재료 |
주제어 |
고로슬래그 ; 플라이애쉬 ; 지오폴리머 콘크리트 ; 탄성계수 ; 쪼갬인장강도 ; Blast furnace slag ; Fly ash ; Geopolymer Concrete ; Modulus of elasticity ; Splitting Tensile Strength |
요약1 |
이 연구에서는 플라이애쉬와 고로슬래그를 혼합한 지오폴리머 콘크리트의 역학성능을 평가하기 위하여 압축강도, 탄성계수 및 쪼갬인장강도에 대해 검토하였다. 또한 다양한 변수에 대한 비교분석을 하기 위해 분체량, 알칼리 활성화제 첨가율 및 실리카퓸 혼입률에 대해서도 동일한 시험을 수행하였으며, 국내·외의 규준식과 비교하였다. 그 결과, 알칼리 활성화제의 첨가율은 18%가 적정하고 실리카퓸 치환율은 5%가 유리한 것으로 나타났다. 지오폴리머 콘크리트의 탄성계수는 변수 및 재령별로 압축강도가 증진됨에 따라 탄성계수가 소폭 상승되는 것으로 나타났으며, 국내·외 규준식에 의한 예측값보다 작은 것으로 나타났다. 또한 응력-변형률 선도를 분석한 결과, 지오폴리머 콘크리트가 일반 OPC 콘크리트 보다 연성적인 거동을 하는 것으로 분석되었다. 쪼갬인장강도는 분체량 400kg/m3와 알칼리 활성화제 첨가율 18%에서 높은 강도를 보였으며, 압축강도에 대한 쪼갬인장강도의 비가 8.7~10.2% 수준인 것으로 분석되었다. |
요약2 |
This study examines the compressive strength, elastic modulus and splitting tensile strength of geopolymer concrete in order to evaluate its mechanical characteristics according to the admixing of fly ash and blast furnace slag. Moreover, identical tests are also conducted considering the amount of powder, the mixing ratio of alkali activator and the mixing ratio of silica fume for further comparative analysis considering various variables. The comparison with the formulae specified in Korean and overseas codes reveal that a mixing ratio of 18% is adequate for the alkali activator and that a replacement ratio of 5% by silica fume is recommended for silica fume. The elastic modulus of the geopolymer concrete appears to increase slightly with the increase of the compressive strength per variable and age and to be smaller than the values predicted by the formulae specified in Korean and overseas codes. In addition, the examination of the stress-strain curves shows that the geopolymer concrete exhibits ductile behavior compared to the conventional OPC. In view of the splitting tensile strength, high strength is observed for a powder content of 400kg/m3 and a replacement ratio of 18% by silica fume. The resulting ratio of the compressive strength to the splitting tensile strength is seen to range between 8.7 and 10.2%. |
소장처 |
한국건설순환자원학회 |