뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 비정형 건축물 공사의 생산성 분석 및 향상방안 / 노출콘크리트 공사를 중심으로 / An Analysis and Improvement of Free Form Building's Construction Productivity - Focused on Exposed Concrete Work -
저자명 이은영(Lee, Eun-Young) ; 김예상(Kim, Yea-Sang)
발행사 한국건설관리학회
수록사항 한국건설관리학회 논문집, Vol.15 No.3 (2014-05)
페이지 시작페이지(38) 총페이지(9)
ISSN 1229-7534
주제분류 시공(적산)
주제어 비정형 건축물 ; 건설 생산성 ; 생산성 저해요인 ; 비정형 노출콘크리트//Free Form Building ; Construction Productivity ; Productivity Hindrance Factor ; Exposed Concrete
요약1 2007년 독일의 건축 잡지 바우넷에서 선정한 세계 5대 설계사들의 2006 ~ 2010년 설계한 전체 설계 중 25%가 비정형 건축물로, 비정형 건축물은 도시, 국가의 랜드마크로서 그 사회적, 경제적 파급효과가 매우 크다. 국내 또한 인천세계도시축전 기념관, 킨텍스 제2전시관, 동대문디자인 플라자 등 비정형 건축물이 증가하고 있다. 그러나 이러한 설계 트렌드 및 증가하고 있는 비정형 건축물의 수요에 반해 이를 충족할 만한 비정형 건축 프로젝트의 설계 및 시공 관리 경험 부족으로 인해 비정형 프로젝트는 수익성을 기대하기 어렵고, 완공 후에도 많은 문제들이 부각되고 있다. 특히 국내 인력의 비정형 프로젝트 수행 경험부족으로 인해 불확실한 공사비 예측, 설계 과다변경 등으로 인해 완공 후에도 품질 문제를 비롯한 공사비 상승 관련 문제들이 계속 발생하고 있으며, 이와 같은 비정형 건축물의 특성을 고려하지 못한 초기 계획은 프로젝트 수행 시 실제와 그 차이가 커 프로젝트 관리 리스크로 작용하지만 아직 비정형 건축물 프로젝트 관련 실적자료나 사례분석 자료 구축은 미비로 인해 어려움을 겪고 있는 실정이다. 따라서 본 연구에서는 비정형 건축물 공사 중 생산성이 낮은 공종을 선정하여 작업 프로세스 분석 및 실제 현장 생산성 자료 분석을 통해 실질적인 생산성 자료 구축 및 비정형 건축물 공사 생산성 향상 방안을 제시하고자 한다.
요약2 The Global's top five Design Firms selected from BauNetz a German architectural magazine in 2007 designed free form building design which was 25% of the overall design by 2006-2010. Free form building is a landmark of the city and the country so its social and economic impacts are very large. In case of Korea, free form buildings such as Tribowl in Incheon, KINTEX Exhibition hall 2 and Dongdaemun Design Plaza have increased. However, those the increase in design trends and, the needs due to the lack of free form building design and construction management experience, free form building projects can't be expected to profitability and have a number of problems after completion. Especially, there are many excessive quality problems and the rising cost due to design changes frequently and lack of experience and data. Thus an initial plan regardless of considering of free form building's characteristics can be a huge risk because of the difference with the plan and actual projects, yet there aren't free form building project's performance data and case studies related to productivity. In this study, through selection of low-construction productivity works and an analysis of the work process and productivity data, hope to propose an actual field productivity of free form building and the ways to improve productivity.
소장처 한국건설관리학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
비정형건축물의 설계 및 시공
서원석(Seo, Won-Seok) ; 유상준(Yu, Sang-June) - 대한건축학회 학술발표대회 논문집 : Vol.36 No.2 (201610)
국내외 비정형 건축물 외피시스템 사례 분석을 통한 설계 및 시공시 고려사항 도출
류한국(Ryu, Han-Guk) - 한국건설관리학회 논문집 : Vol.14 No.4 (201307)
국내 패시브건축물 설계 및 시공사례
이명주 - 한국그린빌딩협의회 추계학술강연회 논문집 : (200911)
[BIM Practices] 비정형 건축물의 시공 기술 사례
김성진 - KIBIM Magazine(한국BIM학회지) : v.4 n.1 (201403)
[특집] 국내 친환경 건축물 사례 분석
정지나 ; 김용석 ; 이승민 - 그린빌딩(한국그린빌딩협의회지) : v.9 n.1 (200803)
[특집] 비정형 건축의 시공 문제점들
이강 - 건축(대한건축학회지) : v.52 n.4 (200804)
Sloped-LOM 방식 3D 프린터를 이용한 비정형 EPS 거푸집 제작 공법 개발
안희재(Ahn, Heejae) ; 이동윤(Lee, Dongyoun) ; 지우종(Ji, Woojong) ; 이우재(Lee, Woojae) ; 조훈희(Cho, Hunhee) - 한국건축시공학회 논문집 : Vol.20 No.2 (202004)
[특집] 방수공사의 종류와 시공기술의 이해
안상로 ; 곽규성 ; 최성민 ; 오상근 - 한국건축시공학회지 : v.10 n.4(통권 제42호) (201008)
생산성 예측을 위한 생산성 영향요인 선정 프로세스
임재인(Lim, Jae-In) ; 김예상(Kim, Yea-Sang) ; 김영석(Kim, Young-Suk) ; 김상범(Kim, Sang-Bum) - 한국건설관리학회 논문집 : Vol.9 No.4 (200808)