뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 커튼월 스팬드럴용 진공유리의 열파손에 대한 비교실험 / A Comparative Experiment on Thermal Stress Failure of Vacuum Glazing applied in Curtain Wall at Spandrel area
저자명 김승철(Kim, Seung-Chul) ; 윤종호(Yoon, Jong-Ho) ; 신우철(Shin, U-Cheol) ; 안정혁(Ahn, Jung-Hyuk)
발행사 한국생태환경건축학회
수록사항 KIEAE Journal, Vol.16 No.3(통권 79호) (2016-06)
페이지 시작페이지(121) 총페이지(8)
ISSN 2288-968X
주제분류 환경및설비
주제어 진공유리 ; 스팬드럴 ; 열파손 ; 열응력//Vacuum glazing ; Spandrel ; Thermal breakage ; Thermal stress
요약2 Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was 114.4℃ for the single low-e glass and 118.9℃ for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.
소장처 한국생태환경건축학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
커튼월 유리의 열파손에 관한 실험적 연구
이재현 ; 남중우 ; 방중석 - 한국건축시공학회 학술.기술논문발표회 논문집 : v.13 n.1(통권 제24호) (201305)
[특집] 방수공사의 종류와 시공기술의 이해
안상로 ; 곽규성 ; 최성민 ; 오상근 - 한국건축시공학회지 : v.10 n.4(통권 제42호) (201008)
[연구논문-건축·주택] 공동주택 지하주차장 결로 방지 방안
홍석진 ; 성기철 ; 김지현 - 대우건설기술 : 통권 제32호 (201008)
국내 패시브건축물 설계 및 시공사례
이명주 - 한국그린빌딩협의회 추계학술강연회 논문집 : (200911)
유리의 열깨짐 현상과 방지대책에 관한 연구
신재규 ; 황우진 ; 최원기 - 대한설비공학회 하계학술발표회 논문집 : (201107)
[특집] 국내 친환경 건축물 사례 분석
정지나 ; 김용석 ; 이승민 - 그린빌딩(한국그린빌딩협의회지) : v.9 n.1 (200803)
[현업정보] 당사 시공사례를 중심으로 살펴본 공동주택 부위별 결로 원인 및 대책
김동균 - 건설기술ㅣ쌍용 : 2008. 겨울호(v.49) (200812)
프로그램과 다이어그램의 적용을 통한 건축 형태 생성 연구
윤혜경(Yoon Hae-Kyung) ; 김주영(Kim Ju-Young) ; 홍원화(Hong Won-Hwa) - 대한건축학회논문집 계획계 : v.26 n.02 (201002)
로이유리의 저방사 코팅 적용 위치에 따른 실내 온도변화 및 에너지 성능 비교 분석
정석환(Jung Suk-Hwan) ; 김성우(Kim Sung-Woo) ; 박상현(Park Sang-Hyun) ; 이종찬(Lee Jong-Chan) ; 임정희(Lim Jung-Hee) ; 김병선(Kim Byung-Seon) - 대한건축학회논문집 계획계 : v.23 n.8 (200708)
[기술정보] 지하공간의 결로발생 현황과 대응방안
홍구표 - 건설기술ㅣ쌍용 : 2010. 가을호(v.56) (201009)