뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 반응표면법 및 다목적 최적화를 이용한 철근콘크리트 건물모델의 모델 개선 / Model Updating of a RC Frame Building using Response Surface Method and Multiobjective Optimization
저자명 이상현(Sang-Hyun Lee) ; 유은종(Eunjong Yu)
발행사 한국전산구조공학회
수록사항 한국전산구조공학회논문집, Vol.30 No.1 (2017-02)
페이지 시작페이지(39) 총페이지(8)
ISSN 1229-3059
주제분류 구조
주제어 유한요소모델개선 ; 반응표면법 ; 다목적최적화 ; 진동실험 ; 시스템 식별 ; 내진보강//FE model updating ; response surface method ; multi-objective optimization ; vibration test ; system identification ; seismic retrofit
요약1 본 논문에서는 반응표면법과 다목적최적화 기법을 이용한 유한요소모델개선기법의 절차를 제안하고 이를 저층의 철근콘크리트건물의 모델개선에 적용하였다. 대상건물은 전단벽 신설 및 댐퍼부착을 위한 부재의 강재보강을 통해 내진보강이 이루어진 건물로서 보강전후에 소형 가진기를 이용한 진동실험을 실시하여 동특성을 구하였다. 대상건물의 개선에 사용된 변수는 기존콘크리트, 신규타설된 콘크리트, 조적의 탄성계수, 신축줄눈부의 스프링계수, 강재보강된 부재의 유효강성비이다. 보강전후 건물의 초기모델을 구축한 후 중심합성법에 따라 개선변수의 값을 변화시키면서 얻은 해석결과를 통해 고유진동수의 오차와 모드형상의 오차를 나타내는 2개의 반응함수를 구하고, 이를 다목적최적화의 목적함수로 사용하였다.
요약2 In this paper, a model updating procedure based on the response surface method combined with the multi-objective optimization was proposed and applied for updating of the FE models representing a low-rise reinforced concrete building before and after the seismic retrofit. The dynamic properties to be matched were obtained from vibration tests using a small shaker system. By varying the structural parameters according to the central composite design, analysis results from the initial FE model using a commercial software were collected and used to produce two regression functions each of which representing the errors in the natural frequencies and mode shapes. The two functions were used as the objective functions for multi-objective optimization. Final solution was determined by examining the Pareto solutions with one iteration. The parameters representing the stiffnesses of existing concrete, masonry, connection stiffness in expansion joint, new concrete, retrofitted members with steel section jacketing were selected and identified.
소장처 한국전산구조공학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
2025년 의무화 로드맵에 따른 공공시설 제로에너지건축물 인증제도 시장 수용성
이승민(Lee, Seung-Min) ; 김진호(Kim, Jin-Ho) ; 신광수(Shin, Gwang-Su) ; 김의종(Kim, Eui-Jong) - 한국건축친환경설비학회 논문집 : Vol.12 No.6 (201812)
가우시안 프로세스 모델을 이용한 냉각탑 최적제어
김재민(Kim, Jae-Min) ; 신한솔(Shin, Han-Sol) ; 추한경(Chu, Han-Gyeong) ; 이동혁(Yi, Dong-Hyuk) ; 박성호(Park, SungHo) ; 여명석(Yeo, Myoung-Souk) ; 박철수(Park, Cheol-Soo) - 추계학술발표대회 : 2018 (201811)
냉각수 유량 제어를 통한 냉방시스템의 에너지 절감 효과에 관한 검토
김혜미(Kim, Hyemi) ; 송영학(Song, Young-hak) - 대한건축학회 학술발표대회 논문집 : Vol.37 No.1 (201704)
사무소 건물에서 냉동기의 대수제어를 통한 냉동기 거동 특성 및 에너지 절감 효과 분석
서병모(Byeong-Mo Seo) ; 손정은(Jeong-Eun Son) ; 이광호(Kwang Ho Lee) - 설비공학논문집 : Vol.28 No.04 (201604)
사무소 건물에서 냉동기의 부분부하율 및 냉방 에너지 성능 특성 분석
서병모(Byeong-Mo Seo) ; 유병호(Byeong-Ho Yu) ; 이광호(Kwang-Ho Lee) - 설비공학논문집 : Vol.27 No.11 (201511)
내진성능평가요령에 따른 4층 RC조 건물의 내진평가
유은종 ; 김용준 ; 김태진 ; 김승진 ; 안충원 - 한국지진공학회 추계워크샵 발표논문집 : (201109)
IoT정보기반 Modelica-EnergyPlus Co-simulation을 통한 에너지소비량 추정
김혜진(Kim, Hye-Jin) ; 서동현(Seo, Dong-Hyun) - 한국건축친환경설비학회 논문집 : Vol.13 No.5 (201910)
조적 끼움벽 및 허리벽을 가지는 철근콘크리트 골조 내진성능평가
이상현 ; 정란 ; 김혜진 ; 김선웅 ; 안충원 - 한국지진공학회 추계워크샵 발표논문집 : (201009)
Investigation on the Reduction Effect on Cooling Power Consumption and Operating Cost of Mist-spray Outdoor Units in Air Conditioner
이건호(Keon-ho Lee) ; 조동우(Dong-woo Cho) ; 김혜미(Hyemi Kim) ; 송영학(Young-hak Song) - ARCHITECTURAL RESEARCH(대한건축학회 논문집) : Vol.19 No.4 (201712)
일방향 정적해석을 통한 필로티형 RC 건물의 지진거동 연구
이용규 ; 고동우 - 대한건축학회지회연합회 논문집 : v.15 n.05 (통권57호) (201310)