뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 도심지 토공사 PRD (Percussion Rotary Drill) 공법의 천공작업 소요시간 산정 방안에 관한 연구 / A Study on Estimating Time for PRD (Percussion Rotary Drill) Pliing Work
저자명 김용규(Kim, Yong-Gyu) ; 최창훈(Choi, Chang-Hoon) ; 한충희(Han, Choong-Hee) ; 이준복(Lee, Junbok)
발행사 한국건설관리학회
수록사항 한국건설관리학회 논문집, Vol.19 No.3 (2018-05)
페이지 시작페이지(3) 총페이지(8)
ISSN 2005-6095
주제분류 시공(적산)
주제어 PRD ; 항타기 ; 천공작업 ; 작업 소요시간 산정//PRD ; Pile Driver ; Piling Works ; Estimating Work Time
요약1 근래에 공사의 대형화, 복잡화 등으로 인해 기계화시공은 보편화되었으며, 건설기계는 성공적인 시공을 위한 주요소이다. 그러나 건설기계가 차지하는 비중이 높아지고 있음에도 불고하고 건설기계의 작업능력에 대한 분석은 미미한 실정이다. 또한 현재 품셈에서 모든 건설기계에 대한 기준이 정의되어 있지 않음으로 인해 시공계획 시 작업자에 따라 공사기간을 자의적으로 적용하고 있어 실제 시공 간 공사기간이 부족하여 돌관작업이나 공기지연이 발생된다. 따라서 본 연구에서는 PRD공법에서 사용되는 항타기의 천공작업 공사기간을 기존 방법보다 정확하게 산출할 수 있도록 작업일보를 현장 실사를 통해 천공시간 데이터를 수집하여 항타기의 천공 작업 소요시간을 산정하는 식을 정립하였다. 본 연구 결과를 바탕으로 천공작업의 정확한 공사기간을 산정한다면 공사기간이 부족하여 발생하던 돌관작업이나 공기지연을 방지할 수 있을 것으로 사료된다.
요약2 In recent years, mechanized construction has become commonplace due to increases in the scale and complexity of construction, and construction machinery is a major factor in successful construction. However, even though the proportion of construction machinery is increasing, analysis of the work capacity of construction machinery is inadequate. In addition, since the standards for all construction machines are currently not defined in quantity-perunit, the construction period is arbitrarily applied according to the operator at the time of the construction plan. As a result, the construction period of the actual construction is insufficient, and rushed work or construction delays occur. Therefore, in this study, in order to calculate the construction period of the piling work of the pile driver used in the PRD method more accurately than the existing method, the formula for calculating the time required for the piling work of the pile driver was established by collecting piling time data from the daily task reports through the field survey. If the precise construction period of piling work is estimated based on the results of this study, it will be possible to prevent the rushed work and construction delays that occur duet o the short construction period.
소장처 한국건설관리학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
[기술정보] 흙막이가시설의 종류 및 최신공법 소개
윤성필 - 건설기술ㅣ쌍용 : 2010. 가을호(v.56) (201009)
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
[특집] 방수공사의 종류와 시공기술의 이해
안상로 ; 곽규성 ; 최성민 ; 오상근 - 한국건축시공학회지 : v.10 n.4(통권 제42호) (201008)
[연구논문-건축·주택] 공동주택 지하주차장 결로 방지 방안
홍석진 ; 성기철 ; 김지현 - 대우건설기술 : 통권 제32호 (201008)
[특집] 국내 친환경 건축물 사례 분석
정지나 ; 김용석 ; 이승민 - 그린빌딩(한국그린빌딩협의회지) : v.9 n.1 (200803)
저탄소 시대의 친환경건축물 기술/사례
조욱희 - (사)한국그린빌딩협의회 창립 10주년 기념대회 : (201004)
심대화에 의한 PRD공법 개선 연구
김건성(Kim, Gun-Sung) ; 임수상(Lim, Su-sang) ; 현창택(Hyun, Chang-Taek) - 대한건축학회 학술발표대회 논문집 : Vol.36 No.1 (201604)
현장 조건에 따른 Top-Down 공법 사례분석에 관한 연구
신현정 ; 신규철 - 한국건축시공학회 학술.기술논문발표회 논문집 : v.11 n.1(통권 제20호) - 학계 (201105)
국내 패시브건축물 설계 및 시공사례
이명주 - 한국그린빌딩협의회 추계학술강연회 논문집 : (200911)
[논문] 세미 오픈컷 역타공법의 현장적용에 관한 연구
소광호 - 한국공간구조학회지 : v.11 n.2(통권 44호) (201106)