뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 측정지표에 따른 건설생산성 비교 / A Comparative Study on Construction Productivity Trends as Analyzed by Various Measures
저자명 이치주(Lee, Chijoo) ; 이강(Lee, Ghang) ; 원종성(Won, Jongsung)
발행사 대한건축학회
수록사항 대한건축학회논문집 구조계, Vol.35 No.04 (2019-04)
페이지 시작페이지(175) 총페이지(10)
ISSN 1226-9107
주제분류 구조
주제어 건설노동생산성 ; 층당 소요공사일수 ; 연면적 1 ; 000m2당 소요공사일수//construction labor productivity ; construction duration per floor ; construction duration per 1 ; 000m2 gross floor area
요약1 건설생산성 향상을 위해서는 건설생산성의 과거와 현재 추세를 이해해야 한다.??따라서 본 연구에서는 1995년부터 2015년까지 한국, 미국, 영국, 일본의 건설생산성 변화 추이를 세 가지 측정 방법을 활용하여 분석, 비교하고자 한다. 세가지 측정 방법은 건설노동생산성, 층당공사일수, 연면적 1,000m2당 공사일수이다. 분석 결과, 4개국의 국제 건설 경쟁력은 측정지표에 따라 차이가 있었다. 미국의 노동생산성이 가장 높았고, 한국이 뒤를 이었다. 한국은 생산성 증가율이 일본에 이어 두번째로 높았다. 반면, 공사기간 측면에서는 다른 국가들에 비하여 건설생산성이 상대적으로 낮은 것으로 분석되었다.
요약2 To improve productivity in the architecture, construction and engineering industry, it is critical to understand both current and historic trends in construction productivity. This study analyzes and compares construction productivity trends of South Korea, the U.S., the U.K., and Japan 1995 to 2015 using the following three measures: construction labor productivity, construction duration per floor, and construction duration per 1,000 m2 floor area. As the results, the international competitiveness of each country varied according to which measures were used to analyze them. Among the four countries, the construction labor productivity of the U.S. was the highest, followed by that of South Korea. South Korea also had the second highest productivity growth rate, following that of Japan. On the other hand, when analyzed from the perspective of construction duration, the construction productivity in South Korea appeared relatively lower than those of other countries. There were differences in the location of construction competitiveness of each country analyzed by various measures. Therefore, to accurately diagnose and improve the construction competitiveness in South Korea, strategies based on various measures are need to established simultaneously.
소장처 대한건축학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
생산성 예측을 위한 생산성 영향요인 선정 프로세스
임재인(Lim, Jae-In) ; 김예상(Kim, Yea-Sang) ; 김영석(Kim, Young-Suk) ; 김상범(Kim, Sang-Bum) - 한국건설관리학회 논문집 : Vol.9 No.4 (200808)
건설현장 생산성 측정의 효율적 방안 제시
장효원 ; 김수용 ; 김대영 - 한국건설관리학회 학술발표대회 논문집 : (200711)
건설 프로젝트의 생산성관리 시스템
유정호 ; 이현수 - 대한건축학회논문집 구조계 : v.18 n.7 (200207)
2025년 의무화 로드맵에 따른 공공시설 제로에너지건축물 인증제도 시장 수용성
이승민(Lee, Seung-Min) ; 김진호(Kim, Jin-Ho) ; 신광수(Shin, Gwang-Su) ; 김의종(Kim, Eui-Jong) - 한국건축친환경설비학회 논문집 : Vol.12 No.6 (201812)
국내 건설 생산성 저해요인 분석 및 향상방안 제시
김주영(Kim Ju-Young) ; 최재현(Choi Jae-Hyun) ; 이승현(Lee Seung-Hyun) - 대한건축학회논문집 구조계 : v.27 n.2 (201102)
기준 생산성 산출을 통한 노동 생산성 벤치마킹
윤인석(Yoon, In-Seok) ; 이진강(Lee, Jin-Gang) ; 이현수(Lee, Hyun-Soo) ; 박문서(Park, Moonseo) - 대한건축학회 학술발표대회 논문집 : Vol.36 No.2 (201610)
주상복합 빌딩의 외벽 거푸집 공법 선정을 위한 의사결정 지원모델
서해미(Seo, Hae-Mi) ; 신나래(Shin, Na-Rae) ; 염동준(Yeom, Dong-Jun) ; 김영석(Kim, Young-Suk) - 대한건축학회논문집 구조계 : v.29 n.9 (201309)
한국 건설 산업 생산성의 국제경쟁력 분석
원종성(Won, Jong-sung) ; 이강(Lee, Ghang) - 한국건설관리학회 논문집 : Vol.9 No.4 (200808)
[특집] GS건설 Precon Service 소개
정연석 - 건설관리(한국건설관리학회지) : Vol.17 No.3 (201606)