뒤로 원문보기 | 미리보기 [ 원문보기시 소비되는 포인트 : 100 포인트 ]
논문명 고로슬래그 미분말의 치환율과 분말도가 시멘트 모르타르의 자기수축에 미치는 영향 / Influence of Replacement Ratio and Fineness of GGBFS on Autogenous Shrinkage of Cement Mortars
저자명 송치원(Chiwon Song) ; 최성철(Seongcheol Choi)
발행사 한국콘크리트학회
수록사항 한국콘크리트학회논문집, Vol.32 No.1 (2020-02)
페이지 시작페이지(77) 총페이지(8)
ISSN 1229-5515
주제분류 재료 / 구조
주제어 고로슬래그 미분말; 분말도; 자기건조; 자기수축; 치환율 // ground granulated blast-furnace slag (GGBFS); fineness; self-desiccation; autogenous shrinkage; replacement ratio
요약1 이 연구에서는 고로슬래그 미분말의 치환율과 분말도가 시멘트 모르타르의 자기수축에 미치는 영향을 실험적으로 분석하기 위하여 고로슬래그 미분말 함량(결합재 중량 대비 0, 50, 65, 80 %)과 분말도(4,330 cm2/g, 7,650 cm2/g)를 변수로 시편을 제작하고 내부상대습도와 자기수축을 측정하였다. 고로슬래그 미분말이 결합재의 65 %까지 치환된 시편들에서는 고로슬래그 미분말의 함량이 증가할수록 자기건조 및 자기수축이 증가하였다. 그러나, 고로슬래그 미분말이 결합재의 80 % 치환된 시편에서는 자기건조 및 자기수축이 감소하였다. 이러한 결과는 고로슬래그 미분말에 의한 시멘트계 재료의 공극구조 및 수화반응 변화가 공극 내부에서 형성되는 메니스커스의 반경을 변화시키고 결국에는 모세관 응력을 변화시키는 것에 기인한다. 또한, 높은 분말도를 갖는 고로슬래그 미분말은 수화반응을 촉진시킴으로써 시멘트 모르타르의 자기건조 및 자기수축을 증가시키는 것으로 나타났다.
요약2 This study experimentally analyzed the effects of replacement ratio and fineness of ground granulated blast-furnace slag (GGBFS) on the autogenous shrinkage of cement mortar. The specimens were fabricated with GGBFS content (0, 50, 65 and 80 % by weight of binder) and fineness (4,330, 7,650 cm2/g) as variables, and the internal relative humidity and autogenous shrinkage were measured. The self-desiccation and autogenous shrinkage of the specimens with GGBFS replacement ratio up to 65 % increased as the content of the GGBFS increased whereas those decreased in the specimens with the GGBFS replacement ratio of 80 %. This is because GGBFS changed the pore structures and hydration of cementitious materials, resulting in the changes in the radius of meniscus formed inside the pores and eventually changes in the capillary stresses. In addition, the self-desiccation and autogenous shrinkage of cement mortar increased with increasing fineness of GGBFS.
소장처 한국콘크리트학회
스크랩하기
추천문헌 이 논문을 열람하신 아우릭 회원님들이 많이 열람하신 논문을 추천해 드립니다.
[특집] 방수공사의 종류와 시공기술의 이해
안상로 ; 곽규성 ; 최성민 ; 오상근 - 한국건축시공학회지 : v.10 n.4(통권 제42호) (201008)
[시론] 4차 산업혁명 시대, 건축의 대응
이명식(Lee, Myung-Sik) - 건축(대한건축학회지) : Vol.61 No.05 (201705)
미분쇄한 플라이애시 모르타르의 강도증진 방안에 관한 연구
조현대 ; 정재동 - 한국건축시공학회 논문집 : v.10 n.1(통권 제39호) (201002)
다양한 공정 조건에 따라 제조된 탄소섬유 보강근의 물리적 특성 및 미세구조분석
권도영(Do-Young Kwon) ; 김남일(Nam-Il Kim) ; 염우성(Woo Sung Yum) ; 추용식(Yong-Sik Chu) - 한국콘크리트학회논문집 : Vol.35 No.2 (202304)
시멘트 액체형 방수재(KS F 4925) 시험 평가방법 개선방안 연구
김명지(Kim, Meong-Ji) ; 김수연(Kim, Soo-Yeon) ; 오상근(Oh, Sang-Keun) - 대한건축학회 학술발표대회 논문집 : Vol.39 No.1 (201904)
저온양생하에서 거푸집 종류에 따른 콘크리트의 압축강도와 적산온도 특성 평가
최시현(Choi, Si-Hyun) ; 문영범(Mun, Young-Bum) ; 김재영(Kim, Jae-Young) ; 이한승(Lee, Han-Seung) - 한국건축시공학회 학술.기술논문발표회 논문집 : v.16 n.2(통권 제31호) (201610)
무수석고 함량이 고로슬래그 미분말을 대량 활용한 콘크리트 특성에 미치는 영향
문규돈 ; 김주형 ; 조영근 ; 최영철 - 한국건설순환자원학회 논문집 : v.2 n.3 (201409)
[특집] 시멘트 제조에서의 대체연료 사용현황
민태범(Tae-Beom Min) ; 최현국(Hyun-Kuk Choi) ; 김형철(Hyeong-Cheol Kim) ; 김하영(Ha-Yeong Kim) - 한국건설순환자원학회지 : Vol.14 No.1 (201903)
액상형 조강제의 구성성분별 시멘트 모르타르에 미치는 영향
이문환(Lee, Mun-Hwan) ; 송영찬( Song, Young-Chan) - 대한건축학회논문집 구조계 : v.23 n.11 (200711)
[특집] 한국건축의 미래, 스마트 콘크리트
김선우(Kim, Sun-Woo) ; 윤현도(Yun, Hyun-Do) ; 서수연(Seo, Soo-Yeon) - 건축(대한건축학회지) : Vol.60 No.02 (201602)