논문명 |
전단철근비와 보의 단면크기에 따른 고강도 철근콘크리트보의 전단강도 특성 연구 / A Characteristic Study on Shear Strength of High Strength Reinforced Concrete Beams according to Shear Reinforcement Ratio and Beam Section Size |
저자명 |
박나정(Park, Na-Jeong) ; 노형진(Noh, Hyung-Jin) ; 유인근(Yu, In-Geun) ; 백승민(Baek, Seung-Min) ; 김우석(Kim, Woo-Suk) ; 곽윤근(Kwak, Yoon-Keun) |
발행사 |
대한건축학회 |
수록사항 |
대한건축학회논문집, Vol.36 No.08 (2020-08) |
페이지 |
시작페이지(181) 총페이지(11) |
ISSN |
2733-6247 |
주제분류 |
구조 / 재료 |
주제어 |
전단철근비; 크기효과; 전단강도 // Shear Reinforcement Ratio; Size Effect; Shear Strength |
요약1 |
아직도 전단강도에 대한 많은 연구가 진행되고 있지만, 기존의 기준식 및 제안식들은 일반강도 콘크리트보를 기준으로 만든 식이므로 고강도 콘크리트보에의 적용은 검토할 필요가 있다. 따라서 본 연구에서는 위와 같은 사실에 기초하여 인장철근비와 전단경간비를 일정하게 하고, 보의 크기와 전단철근비를 변수로 한 전단실험을 하여, 일반강도 콘크리트보의 전단강도식이 고강도 콘크리트보에서도 적용가능한지를 검토해보고, 전단설계에서의 현행기준()이 고강도 콘크리트보에서도 적용가능한지를 알아보고자 한다. 이를 위해 인장철근비(ρ), 콘크리트압축강도(=50MPa) 및 전단경간비()를 일정하게 하고, 단면의 크기에 따라 시험체의 종류를 H1, H2, H3 3개의 시리즈로 나누었으며, 각 단면당 전단철근의 간격에 따라 4개씩 총 12개의 시험체를 제작하여 실험을 하였다. 실험결과를 기존의 이론식 및 제안식과 비교.검토하였다. |
요약2 |
The purpose of this study is to investigate the shear strength of high strength reinforced concrete beams according to shear reinforcement ratio and beam section size. A total of twelve specimens were tested and designed concrete compressive strength is 50 MPa. The main variables are shear reinforcement ratio and beam section size fixed with shear span to depth ratio (a/d = 2.5), the tensile reinforcement ratio (ρ = 0.013) and width to depth ratio (h/b = 1.5). The test specimens were divided into three series of H1 (225×338 mm), H2 (270×405 mm) and H3 (315×473mm) respectively. The experimental results show that specimens represent various failure modes such as diagonal tensile failure (DTF), bond failure (BF), shear compression failure (SCF) and flexural compression failure (FCF). In the H1 series, the shear strength increased by 92.0%, 94.1% and 128.4% respectively as the shear reinforcement ratio increased, 103.8%, 138% and 143% respectively in the H2 series, 131.1%, 168.7% and 151.7% respectively in the H3 series. The decreasing rate of shear strength increased as the beam’s effective width increased, which is considered to be due to the size effect. Then, it is shown that the decreasing rate of shear strength increases as d/s increases, and it can be seen that the effect of the size effect increases as the spacing between shear reinforcing bars decreases. As compared to the standard and the proposed equations, theoretical values by proposed equation of Zsutty, Bazant, and Lee has compared relatively well with experimental values. |
소장처 |
대한건축학회 |