| 논문명 |
철골용 클램프 시공방향에 따른 변형 및 성능확인 / Steel Frame Clamp Deformation and Performance Check based on Clamping Orientation |
| 저자명 |
모승언(Mo, Seung-Un) ; 임남기(Lim, Nam-Gi) |
| 발행사 |
한국건축시공학회 |
| 수록사항 |
한국건축시공학회 논문집, Vol.22 No.2 (2022-04) |
| 페이지 |
시작페이지(161) 총페이지(9) |
| ISSN |
15982033 |
| 주제분류 |
시공(적산) |
| 주제어 |
강관비계; 설계기준; 유한요소 구조해석; 클램프; 안전; 가설기자재 // scaffolding; standard; midas NFX; clamp; safety; temporary equipment |
| 요약1 |
정부[3]에서는 강관비계를 재래식 비계로 규정하고 일체형 작업발판인 시스템비계를 우선 설치하도록 제도화 하고 강관비계의 사용을 최대한 지양하고 있는 추세이다. 하지만 발전소, 플랜트 현장 등 장비의 진입이 안 되거나 본 구조물의 구조가복잡한 곳, 그리고 지면에서 비계를 쌓아 올리지 못하는 곳에서는 강관비계를 설치하여 작업할 수 밖에 없다. 고소부위의H-beam 구조물에 강관비계를 설치하여 작업자들이 안전하게 작업을 할 수 있도록 작업공간을 형성하기 위해서는 철골용클램프의 성능은 매우 중요한 요소이다. 본 연구에서는 철골용 클램프의 설치 방향별 부재의 변형 및 인장하중에 대해 성능시험 및 구조해석 모델링을 통해 확인한 결과 설치 방향별 성능은 안전인증 기준인 인장하중 10,000N을 만족하는 것으로 확인 되었다. 다만 성능값은 만족하지만 부착부 누름 볼트의 변형발생이 확인되었고, 부착부 본체는 변형이 미미한 것으로 확인되었으므로 철골용 클램프는 하중이 전달되는 방향으로 설치하여 부착부 본체에 하중이 제대로 전달될 수 있도록 하는 것이 보다 안전한 방법이다. |
| 요약2 |
The government [3] specifies steel pipe scaffolding as conventional scaffolding and is promoting theinstallation of system scaffolding, an integrated work platform, and avoidance of the use of steel pipescaffolding as much as possible. However, in places where equipment cannot enter, such as powerplants and plant sites, places the structure is complex, and places where scaffolding cannot be stackedon the ground, there is no choice but to install steel pipe scaffolding. When installing steel pipescaffolding on an H-beam structure at a high place, the performance of the steel frame clamp is veryimportant in order to form a work space which workers can work safely. In this study, the displacementmagnitude and tensile load of members in each installation direction of the clamp for steel frame wereverified through performance tests and structural analysis modeling. As a result, it was confirmed thatthe performance for each installation direction satisfies the safety certification standard tensile load of10,000N. Although the performance value is satisfactory, deformation of the attachment pressing boltwas verified and was confirmed to have minimal deformation. Thus, to ensure the load is properly tothe attachment body, the clamp for a steel frame must be installed in the direction in which the load istransmitted. |
| 소장처 |
한국건축시공학회 |