논문명 |
철근 커플러이음의 시공품질 확인 현황 및 적정 시공품질 확인 방안 / Current Status and Appropriate Check Method of Construction Quality Control for Rebar Coupler Splice |
저자명 |
김주용(Kim, Ju-Yong) ; 김진동(Kim, Jin-Dong) ; 이영도(Lee, Young-Do) ; 김광희(Kim, Gwang-Hee) |
발행사 |
한국건축시공학회 |
수록사항 |
한국건축시공학회 논문집, Vol.22 No.6 (2022-12) |
페이지 |
시작페이지(531) 총페이지(12) |
ISSN |
15982033 |
주제분류 |
시공(적산) |
주제어 |
커플러 이음; 시공품질; 커플러 나사산; 품질확인 방안 // coupler splice; construction quality; number of coupler thread; quality control of coupler |
요약1 |
건물의 초고층화에 따라 구조재료의 강도 증가와 철근의 배근량이 증가할 뿐만 아니라 철근의 시공과정에서 적절한 이음방식의 사용이 필수적인 요소 중 하나이다. 본 연구에서는 철근 커플러이음의 시공품질 확인실태를 전문가 설문을 통해 파악하고, 실제 현장 시공과 유사한 시험체에 대한 품질시험을 통해 적정 품질 확인방안을 제시하고자 한다. 시험결과 설문조사 결과에서 나온 품질확인 방법 중 커플러 조임방법과 상하 두 철근의 맞댐 정도 등이 시험체 강도에 영향을 주지 않는다는결과를 얻었다. 따라서 철근과 커플러의 나사산 개수를 계산치보다 여유를 두고 제작하고, 현장 시공시 나사산이 완전히 조립되었는지 확인하는 것이 적절한 커플러 품질 확인방법으로 사료된다. |
요약2 |
As buildings become taller, the strength of structural materials must increase and the amount of rebarreinforcement also increases while the application of an appropriate rebar splice method in theconstruction process become one of the essential factors. In this research, the current status of qualitycheck for rebar coupler is identified by an expert questionnaire and an appropriate quality checkmethod is proposed through a quality test on specimens similar to actual on-site construction. In the testresults, it was revealed that, among the quality check methods for rebar coupler joints, the couplertightening method and face to face degree of between upper and lower rebar did not affect the strengththe specimen. Therefore, it is considered to be an appropriate way to check the coupler quality check tocheck whether the threads are completely assembled during on-site construction through manufacturethe number of threads of rebar and coupler with a margin beyond the calculated thread number. |
소장처 |
한국건축시공학회 |